eLxr packagesDownload Page for linuxcnc-uspace-dev_2.9.4-2+deb13u1_arm64.deb on 64-bit ARMv8 machines
If you are running eLxr, it is strongly suggested to use a package manager like apt to download and install packages, instead of doing so manually via this website.
You should be able to use any of the listed mirrors by adding a line to your /etc/apt/sources.list like this:
deb http://mirror.elxr.dev/elxr bianca main
Replacing mirror.elxr.dev/elxr with the mirror in question.
You can download the requested file from the pool/main-debian-community/l/linuxcnc/ subdirectory at any of these sites:
Huom: Joillakin selaimilla täytyy erikseen valita selaimesta, että tiedosto tallennetaan levylle. Esimerkiksi Firefoxissa tai Mozillassa pitää painaa Shift-näppäintä samaan aikaan kun napsauttaa linkkiä.
Lisätietoa tiedostosta linuxcnc-uspace-dev_2.9.4-2+deb13u1_arm64.deb:
| Tarkka koko | 261780 tavua (255.6 kByte) |
|---|---|
| MD5-tarkiste | 3e9afa5b917c6092773e44ff5c770f58 |
| SHA1-tarkiste | 6a38b73b1579d66bfd8831a4ce46d57488172766 |
| SHA256-tarkiste | d729671c2d1ed697a9c31f2125741b576bab2dc6bde6447dbcb7cc6a1294b78c |