Download Page for linuxcnc-uspace_2.9.4-2+deb13u1_arm64.deb on 64-bit ARMv8 machines
If you are running eLxr, it is strongly suggested to use a package manager like apt to download and install packages, instead of doing so manually via this website.
You should be able to use any of the listed mirrors by adding a line to your /etc/apt/sources.list like this:
deb http://mirror.elxr.dev/elxr bianca main
Replacing mirror.elxr.dev/elxr with the mirror in question.
You can download the requested file from the pool/main-debian-community/l/linuxcnc/ subdirectory at any of these sites:
Huom: Joillakin selaimilla täytyy erikseen valita selaimesta, että tiedosto tallennetaan levylle. Esimerkiksi Firefoxissa tai Mozillassa pitää painaa Shift-näppäintä samaan aikaan kun napsauttaa linkkiä.
Lisätietoa tiedostosta linuxcnc-uspace_2.9.4-2+deb13u1_arm64.deb:
| Tarkka koko | 25581048 tavua (24.4 MByte) |
|---|---|
| MD5-tarkiste | d7f0a981b51af6285d0bd20a6488f463 |
| SHA1-tarkiste | 7a2a0efdcc38f7bbe1565cb37f621142f445b182 |
| SHA256-tarkiste | 4d124fbb0906a495220dfd6fb5eaba13144538d199d0dfb6eeb11c61fbe0e89d |